SCULPFUN Rotary Roller Feature:
- 100% pre-assembled, plug and play: the machine is 100% installed in the package, equipped with an adapter cable, and only needs to be connected to the Y-axis wiring of the laser engraver to engrave Cylindrical objects, such as pens, water bottle, etc.
- Huge engraving space and 4 raising feet: SCULPFUN rotary roller base design is lower and stable, and equipped with 4 sturdy metal raising feet, so that it has a larger engraving diameter of 6-150mm, which can meet more engravings. need. Metal feet are more solid than plastic feet, and the laser engraver machine is more stable when engraving.
- Sliding space adjustment: Laser roller adjusts the size of the space between the two rubber rollers by sliding, and fixes the rolloer by handscrew, which is simpler and faster than the traditional multi-stage fixing hole adjustment.
- 100% original scale high-precision engraving: Adopts high friction 70A rubber shaft to prevent slipping, and the linear speed of the rotating surface has been precisely calculated. Directly plug in the laser engraving machine cable to engrave the original image in 100% original scale. Does not enlarge or reduce the image.
- Wide compatibility: SCULPFUN laser engraver rotary roller is suitable for multiple engraving software such as lightburn or laserGRBL, and it can be used directly , no need to set parameters in software. In addition, it can be applied to 95% of the laser engravers on the market such as Ortur, Atomstack, etc.
- Free useful accessories: a free soft ruler to measure the size of object; 4 free raising feet, which can be used to increase the height of a variety of laser engraving machines.
Sculpfun Laser Rotary Roller Introduction:
- How to use: Take out the original Y-axis motor cable of the laser engraving machine, plug into SCULPFUN Rotary Roller , and you can start using it. There is no need to set parameter in software, because the surface linear speed of the roller is the same as the original Y-axis speed.
- Available engraving space: cylinder diameter 6-150mm, cylinder length 0-230mm
- Compatible software: Lightburn, LaserGRBL, Benbox, GrblController, LiteFire, etc. There is no need to set up software because the surface linear velocity of the roller is the same as the original Y-axis velocity.
- Compatible machines: suitable for all GRBL motherboard types of engraving machines, including SCULPFUN, Ortur, NEJE, ATOMSTACK and other laser engravers.
- Adjustment of shaft spacing: The shaft spacing can be adjusted steplessly by sliding, and it can be fixed by hand-tightening screws.
Laser Rotary Roller Parameter :
- Product Size: 27x22x5cm
- Product packaging size: 34*25*9cm
- Product packaging weight: 1.5KG
- 1× Sculpfun rotary roller
- 1× A Type wiring
- 1× B Type wiring
- 4× raise feet
- 1× screw bag
- 1× soft ruler
- 1× user manual